Substantiation of regime parameters of vibrating conveyor infrared dryers
Keywords:vibration, wave conveyor, loose products, system unbalance, infrared drying
The analysis of constructive-technological schemes of vibrating conveyor machines for heat-exchange processing of bulk technological masses in the current mode is carried out, which allowed to substantiate the effectiveness of using a new modification of infrared dryers of vibration-wave execution with a flexible transporting body. For this scheme, a vibrating system is developed which mathematical modelling allowed to determine and substantiate the main parameters of the operating mode of the drive mechanism of the projected device. The experiments, using the developed research model, confirm and refine the results of theoretical analysis, energy efficiency and comparatively low metal consumption of the design structure. The difficulty of working with such a large number of factors led to the application of the second similarity theorem and the introduction of a mathematical model of the criteria of Stanton, Froude, Burdo, whose magnitudes are reflected through the main factors of influence and were found experimentally. After using the "dimension theory" and graph-analytic analysis of power functions, a criterial equation of the investigated process was obtained. This allows recommending the regime parameters and the design series of projected thermo-radiation dryers with vibration-wave transport of products when varying the main factors of influence.
Bandura, V., Turcan, O., Palamarchuk, V. 2015. Experimental study of technological parameters of the process of infrared drying of a moving ball of oilseed crops. MOTROL Commission of Motorization and Energetics in Agriculture, vol. 17, no. 4, p. 211-214.
Bubelová, Z., Cerníková, M., Bunková, L., Talár, J., Zajícek, V., Foltin, P., Bunka, F. 2017. Quality changes of longlife foods during threemonth storage at different temperatures. Potravinarstvo Slovak Journal of Food Sciences, vol. 11, no. 1, p. 43-51. https://doi.org/10.5219/688 DOI: https://doi.org/10.5219/688
Czako, P., Zajác, P., Čapla, J., Vietoris, V., Maršálková, L., Čurlej, J., Belej, L., Golian, J., Benešová, L., Martišová, P. 2018. The effect of UV-C irradiation on grape juice turbidity, sensoric properties and microbial count. Potravinarstvo Slovak Journal of Food Sciences, vol. 12, no. 1, p. 1-10. https://doi.org/10.5219/856 DOI: https://doi.org/10.5219/856
Kolyanovska, L. M., Palamarchuk, I. P., Sukhenko, Y., Mussabekova, A., Bissarinov, B., Popiel, P., Mushtruk, M. M., Sukhenkko, V., Vasuliev, V., Semko, T., Tyshchenko, L. 2019. Mathematical modeling of the extraction process of oil-containing raw materials with pulsed intensification of heat of mass transfer. Proceedings of SPIE - The International Society for Optical Engineering, 25 p. https://doi.org/10.1117/12.2522354 DOI: https://doi.org/10.1117/12.2522354
Krasnikov, V., Ginzburg, A., Syroedov, V., Fedutina, G. 1985. Infrared radiation in food technology. Materials of the Fifth All-Union Scientific and Technical Conference "Electrophysical Methods of Food Processing", Moscow, Russia : MTIMMP, p. 12-16.
Nowak, D., Lewicki, P. P. 2004. Infrared drying of apple slices. Innovative Food Science and Engineering Technologies, vol. 5, no. 3, p. 353-360 https://doi.org/10.1016/j.ifset.2004.03.003 DOI: https://doi.org/10.1016/j.ifset.2004.03.003
Palamarchuk, I., Bandura, V., Palamarchuk, V. 2013. Analysis of dynamics of vibroconveyor technological system with kinematic combined vibroexcitation. MOTROL Commission of Motorization and Energetics in Agriculture, vol. 15, no. 4, p. 314-323.
Palamarchuk, I., Turcan, O., Palamarchuk, V. 2015. Justification of the design and technological scheme of infra-red vibrating conveyor dryer for post-harvest processing of loose agricultural products. Collection of scientific works of Vinnytsia National Agrarian University. Series: Engineering, vol. 1, no. 89, p. 117-123.
Palamarchuk, I., Turcan, O., Palamarchuk, V., Kharchenko, S. 2016. Investigation of the competitiveness of the vibrating conveyor infra-red dryer for post-harvesting of grain. Eastern European Journal of Advanced Technology, vol. 2/7, no. 80, 79-85. https://doi.org/10.15587/1729-4061.2016.65887 DOI: https://doi.org/10.15587/1729-4061.2016.65887
Rachmat, R., Hadipernata, M., Sumangat, D. 2010. Pemanfaatan Teknologi Far Infra Red (FIR) Pada Pengeringan Rempah. Balai Besar Penelitian dan Pengembangan Pascapanen Pertanian, vol. 22, no. 1, p. 31- 37.
Sukhenko, Y., Mushtruk, M., Vasyliv, V., Sukhenko, V., Dudchenko, V. 2020. Production of pumpkin pectin paste. Lecture Notes in Mechanical Engineering, p. 805-812. https://doi.org/10.1007/978-3-030-22365-6_80 DOI: https://doi.org/10.1007/978-3-030-22365-6_80
Sukhenko, Y., Sukhenko, V., Mushtruk M., Litvinenko, A. 2019. Mathematical model of corrosive-mechanic wear materials in technological medium of food industry. Lecture Notes in Mechanical Engineering, p. 507-514. https://doi.org/10.1007/978-3-319-93587-4_53 DOI: https://doi.org/10.1007/978-3-319-93587-4_53
Sukhenko, Y., Sukhenko, V., Mushtruk, M., Vasuliv, V., Boyko, Y. 2017. Changing the quality of ground meat for sausage products in the process of grinding. Eastern European Journal of Enterprise Technologies, vol. 4, no. 11, p. 56-63. DOI: https://doi.org/10.15587/1729-4061.2017.108876
Yanovich, V., Drachishin, V., Palamarchuk, V., Sizov, T. 2015. Experimental estimation of amplitude-frequency characteristics of vibroconveyor technological machine. Vibration in technology and technologies, vol. 3, no. 78, p. 145-150.
Zavialov, V., Yanovich, V., Drachyshyn, V., Palamarchuk, V. 2015. Experimental estimation of energy characteristics of vibroconveyor technological machine. Vibration in technology and technologies, vol. 3, no. 79, p. 79-85.
Zverev, S., Sesikashvili, O. 2018. Heating and Dehydration of Grain and Cereals at a Combined Energy Supply. Potravinarstvo Slovak Journal of Food Sciences, vol. 12, p. 79-90. https://doi.org/10.5219/840 DOI: https://doi.org/10.5219/840
How to Cite
LicenseAuthors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).